How to Replace a DAEWOO Engine Coolant Thermostat 17670A78B01-000 94580182: A Step-by-Step Guide

If you’re looking to replace the engine coolant thermostat in your DAEWOO vehicle, you’ve come to the right place. Replacing the thermostat is a relatively simple process that can be done in a few easy steps. Here’s a step-by-step guide to help you get the job done.
削皮机哈哈削皮机哈哈
削皮机哈哈削皮机哈哈
削皮机哈哈削皮机哈哈
Step 1: Gather the Necessary Tools Before you get started, make sure you have all the necessary tools. You’ll need a flathead screwdriver, a pair of pliers, and a new DAEWOO engine coolant thermostat (17670A78B01-000 94580182). alt-144 Step 2: Drain the Coolant Before you can replace the thermostat, you’ll need to drain the coolant from the system. To do this, locate the coolant drain plug and remove it with a pair of pliers. Allow the coolant to drain completely before moving on to the next step. Step 3: Remove the Old Thermostat
Once the coolant has been drained, you can remove the old thermostat. Start by removing the two bolts that hold the thermostat in place. Then, use a flathead screwdriver to pry the thermostat out of its housing. Step 4: Install the New Thermostat Now it’s time to install the new thermostat. Start by lubricating the O-ring with a small amount of coolant. Then, insert the new thermostat into the housing and secure it with the two bolts. Step 5: Refill the Coolant Once the new thermostat is in place, you can refill the coolant. Make sure to use the correct type of coolant for your vehicle. Once the coolant has been refilled, start the engine and check for any leaks. And that’s it! You’ve successfully replaced the engine coolant thermostat in your DAEWOO vehicle. If you have any questions or need help with the process, don’t hesitate to reach out to a professional mechanic.